Take the 2"-4" cuttings and place them in the Neoprene sleeves and into the 2" net pots. No spraying, dipping or anything! Just stick them in the cloner and you’re done.

The cloner is homemade. You will have a 100% success rate with this system. Use tap water with 150ml of Clonex clone solution although no rooting hormone is actually needed. It does root a little faster with the solution.

The cloner is running on the same timer used for all of the aero setups. 1 minute on and 5 minutes off.

The clone system is under a 24", 2-light, HO fluorescents.

Use EZ-Clone sprayers for everything. Run a 396 GPH pump for all the systems.

Use an 18gal. Rubbermaid Roughneck container for your clone unit. Everything else will leak! Trust me on this one.

1/2" PVC pipe is used for sprayer assembly. Use an 11/64" drill bit for the sprayers. Just screw the sprayers right into the PVC pipe.

Check out the plans for a more detailed example.

Roots pop within a few days.

After a few weeks the plants start to develop a nice root system. Don't feed them any nutrients yet.

Download the plans and instructions here.